When it comes to using quiet trolling motors, the attention of most anglers is gotten because they want a trolling motor that is quiet.
The question remains; who makes the quietest trolling motor? With the number of trolling motors online, many anglers want to use quiet models.
Table of Contents
Who makes the quietest trolling motor?
We have many models that are quiet like the Watersnake ASP Salt Water Transom Mount Trolling Motor, Black Haswing 12V Bow Mount Trolling Motor, Garmin Force Foot Steer Trolling Motor, and more.
If you want to fish, indispensable equipment you need is a trolling motor. With this type of equipment, you can fish without scaring the fish or disturb the water.
The trolling motors are compact and easy to use self-contained electric motors, which you can mount to your stern or bow.
The motors do not offer outrageous performance or thrust, but has enough propulsion that can move your boat in the water.
Meanwhile, it moves slightly and in a discreet matter without alerting the fish. If you have a loud motor, it might be hard to catch fish.
Also, if you have a motor with little thrust, it might leave you stranded. In addition, a wrong shaft length can leave you catch more spray than fish.
Every vessel comes with its motor, mount, and properties. Hence, you can only use the most suitable motor for your boat.
How can I make my trolling motor quieter?
Also, if you try to run your motor at a consistent speed that is half of its power, it will have little or no effect on your fishing activities.
We have some easy ways to help you make your trolling motor run quietly. You don’t have to struggle to make this happen. .
Best practices for running a quiet trolling motor
The last thing you want to do is to scare fish away during your fishing activity. Whether you are a beginner or an experienced angler, you want to maintain quietness during fishing.
Our tips will give you an optimum result when it comes to a quiet trolling motor. Here is what to do:
1. Run Motor at a Consistent Speed
When you approach covering ground or fish, you should run at a consistent speed. We recommend that you run below 50% of the power.
We can tell you that fish will not run away because of the constant noises around their environment.
Hence, when you slowly approach these water animals, they have little to worry about such noise.
However, you can adjust your motor speed, but this should be done in a gradual process. You can count to some numbers before you change your speed.
Many anglers make the mistake of turning on and off their trolling motor. When you do this, it can alert the fish that danger is around the corner. Therefore, only do this during emergencies.
2. Adjust the Motor’s Propeller Depth
You have to ensure that the propeller is under the surface of the water. We recommend that you leave it at 12 inches.
When you do this, it ensures that the propeller does not make noise or splash water around.
Meanwhile, you can readjust the trolling motor depth with its depth collar without difficulty. Moreover, some depth collars come with a massive composite or plastic wing nut.
You can easily loosen the nut to suit your preference. As a general rule, you have to set the trolling motor as deep as you can.
3. Electric Currents in the Boat
If you want to reduce the noise of the trolling motor while you fish, you have to minimize or stop electric currents in your boat.
You have to understand that fish are susceptible to electric fields or currents. This can cause them to run from the source.
Each electronic device you have in your boat adds to the electric current, which we called the hot boat or electrical leaks.
However, with devices like the Protroll, you can manage this situation. Meanwhile, the main solution is for you to test your electronic devices before you move out.
Ensure that these devices are grounded and would not cause you a voltage spike if you turn them on in the water.
4. Fish Finders Sonar
Since hit boat can affect your fishing activities, so can your fish finders sonar. Fish can detect the ping that runs when you start your fish finders sonar.
You can reduce the output of the fish finders by turning off one of the depth finders or reducing your power. .
5. Hull Slapping
If you have ever experienced waves with your boat, you will realize that the boat lifts and returns back to the water.
This reaction causes loud noise because the hull slaps the water surface. How do you handle such a situation?
- You have to point the stern of the boat into the wave. Meanwhile, if the waves are not large, the stern rolls across the wave.
- You need to tie a few dock bumpers, used throwable cushions, or pool noodles to the bow cleat. When you do this, the cushion breaks the surface of the water before the hard bottom and lowers the noise.
- The next thing to do is to add weight to the front of the boat. You can add a spare gas or battery to reduce the amount of lift the boat gets from waves. However, you don’t need to overdo it.
- Then, fish off the bow of the boat..
- Finally, you should tie a sea anchor to help keep the boat’s bow down, but this can work when the boat is moving.
Loud Noises in the Boat
As stated, loud noise can push the fish away from your direction. Do not forget that your boat will be busy with activities and increase noise.
You can reduce this noise by being careful with the things you do. If don’t drop doors, it can reduce noise.
Also, do not play music, have loud conversations, or make loud remarks while fishing.
Are trolling motors quiet?
As a result, you can make your motor quiet by using some of the listed ways to reduce noise.